www.sunled.com published date : mar 21, 2008 drawing no : sd sa3150 v7 checked : b.l.liu p.1/5 part number: LUGR37M t-1 (3mm) bi-color indicator lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. features z uniform light output. z low power consumption. z i.c. compatible. z long life - solid state reliability. z rohs compliant. operating characteristics (t a =25c ) ur (gaasp/ gap) ug (gap) unit forward voltage (typ.) (i f =20ma) v f 2.0 2.2 v forward voltage (max.) (i f =20ma) v f 2.5 2.5 v wavelength of peak emission (typ.) (if=20ma) p 627 565 nm wavelength of dominant emission (typ.) (if=20ma) d 625 568 nm spectral line full width at half-maximum (typ.) (if=20ma) ? 45 30 nm capacitance (typ.) (vf=0v, f=1mhz) c 15 15 pf absolute maximum ratings (t a =25c ) ur (gaasp/ gap) ug (gap) unit forward current i f 30 25 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 160 140 ma power dissipation p t 75 62.5 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUGR37M red gaasp/gap 7 19 627 60 green gap 7 15 565 white diffused
www.sunled.com published date : mar 21, 2008 drawing no : sd sa3150 v7 checked : b.l.liu p.2/5 part number: LUGR37M t-1 (3mm) bi-color indicator lamp ? ur
www.sunled.com published date : mar 21, 2008 drawing no : sd sa3150 v7 checked : b.l.liu p.3/5 part number: LUGR37M t-1 (3mm) bi-color indicator lamp ? ug
www.sunled.com published date : mar 21, 2008 drawing no : sd sa3150 v7 checked : b.l.liu p.4/5 part number: LUGR37M t-1 (3mm) bi-color indicator lamp remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com published date : mar 21, 2008 drawing no : sd sa3150 v7 checked : b.l.liu p.5/5 part number: LUGR37M t-1 (3mm) bi-color indicator lamp packing & label specifications LUGR37M
|